Trending Now
GAOA Merchandise: Order yours today!
Sportsman Aileron Rigging Process Improvement
During the process of final-rigging of the ailerons in our early-model Sportsman it became abundantly clear that a very small number of improvements to...
GlaStar Rudder Installation Tips
Marking the rudder spar rivet line: When I set the rivet line on the spar, I ran a taut string under the top and...
Glasair FT Gear Bracket Cracks
Mike Palmer’s Glasair II FT has over 3400 hours on it and he recently discovered cracks in the lugs of his main landing gear...
Auxiliary Airbox Retention
Installations affected
Engine installations typically installed in Van’s aircraft. These are only updraft sump installations with FM-100 or FM-200, FM-200A fuel controls, using Vans filtered...
Building a GlaStar—Presentation by Dave Prizio
Dave Prizio gave a presentation through EAA Chapter 92 on October 5, 2021. Watch the recording below.
Introduction from Chapter 92:
Building a GlaStar—with Dave Prizio
Taking...
