Trending Now
GAOA Merchandise: Order yours today!
GlaStar on Zenair Floats
Written by Bill Bracken
This is my 2010 Glastar on Zenair amphibious floats which I completed over the last 18 months. The first flight took...
Aileron Servo Tabs and Aileron Trim
Aileron Servo Tabs
I have designed and built some servo tabs that can be added to the ailerons after the fact to reduce the aileron...
Nutplate Jig
Submitted by Don Jessup.
Don't delay—make yourself a metal template to drill all the holes you will make for nutplates. About 1" x 2" seems...
Fiberglass Parts Warping in Hot Storage
Glenn Culver sent this tip.
I've had a problem with warped GlaStar doors after storing them in a hot location. If I were to do it...
Italy to Israel in a GlaStar
It's quite understandable that it took about 5 months of preparation for the most beautiful flight in my 20 years light aircraft flying. But...
![Photo: Bidgee [CC BY 3.0 (https://creativecommons.org/licenses/by/3.0)]](https://glasair-owners.com/wp-content/uploads/2019/03/Poor-weather-for-flying-100x70.jpg "Flying In Poor Weather")
