Trending Now
GAOA Merchandise: Order yours today!
GlaStar and Sportsman Aileron Construction Tips
Fitting the aileron skin: In fitting the aileron skin, after clecoing the lower skin surface to the aft ribs, it is easier to turn...
GlaStar Required Nose-up Trim
This tip was provided by Craig O’Neill , Stoddard-Hamilton.
Several folks mentioned having difficulty trimming out the required back pressure at 60 knots down final....
Glasair Overhead GPS Antenna Tray
Here are a couple of quick drawings for my overhead GPS antenna tray.
Produce side walls from 1/4 inch foam, coat one side with...
Water Level Using PVC Pipe
Submitted by Bob Buckihal
Here's an idea that you might pass along to others. For $20 at the local hardware store, I was able to...
Starting the Engine Safely
This tip was submitted by Tom Hoffman, Glasair III.
With 650 hours on the aircraft, N54ODE recently experienced failure of the starter solenoid, which is not...
