Trending Now
GAOA Merchandise: Order yours today!
GlaStar Rudder Installation Tips
Marking the rudder spar rivet line: When I set the rivet line on the spar, I ran a taut string under the top and...
Trevor Berg’s Sportsman on Floats
Here are a few postcards from Trevor Berg and his Sportsman on floats.
These are some of my favourite because they are all taken on...
Brake Caliper Threaded Rod Separation
An email from one of our members with a Glasair II-RG prompted a flurry of activity these last few days.
As you can see, the...
My First 1000 Hours
Written by Ed Covington
I am a 1982 homebuilt Glasair from Washington State. My parts were designed by Tom Hamilton and fabricated by his company,...
Engine Break-in
Break-in of an engine refers primarily to the initial phase of operation in which the piston rings will "seat" against the cylinder walls.
Run-in refers...
![Photo: Bidgee [CC BY 3.0 (https://creativecommons.org/licenses/by/3.0)]](https://glasair-owners.com/wp-content/uploads/2019/03/Poor-weather-for-flying-100x70.jpg "Flying In Poor Weather")
